Kellfri 35-FMF275, Manual

Page: 3 / 24

3
Table of Contents
→
TECHNICAL DATA 35-FMF275
Working width 2750 mm
Weight 445 kg
Rotors 3 pcs
Blades 6
PTO shaft Standard
3-point linkage Cat 2
Power requirement 50-60 hp
Operating speed 6-12 km/h
Gearbox oil 80W-90 0.7 l
PTO speed 540 rpm
INTRODUCTION
Thank you for choosing a product from Kellfri AB. Compliance with the safety instructions,
operating manual and sound common sense will guarantee many years of enjoyment using
the product. Kellfri’s equipment and products are aimed at self-employed farmers, horse en-
thusiasts and other country-dwellers who have stringent performance demands.
PRODUCT INFORMATION
• 2.75 m working width
• 3 rotors, 6 blades
• Best grassland cutting performance
• Robust design
• Height adjustable wear skids
Kellfri’s pasture topper is the specialist on large and small grasslands. The pasture topper is
designed for efficient cutting and topping of grass and fields in mixed terrain.
Its powerful square profile frame gives it good durability and strength. The pasture topper is a
versatile, robust and dependable grassland topper with 6 bolted, specially shaped blades that
fold out of the way in the event of collision with obstacles.
The pasture topper has a highly efficient gearbox with alloyed steel gears to ensure sustain-
able and safe power transmission. The machine is equipped with height adjustable wear skids
for customised cutting height and height adjustable metal guards to counteract stone chip-
ping.
The machine is supplied as standard with a PTO drive shaft and transmission oil.
MACHINE’S FUNCTION
The equipment is intended solely for cutting and topping grass and grasslands. It is prohibited
to use the machine for a purpose other than that described in this manual.