background image

10

← 

Table of Contents

BEFORE USE

Carefully read the safety instructions and the operating instructions. Make sure that you un-

derstand the safety instructions, operating instructions and warning decals. Use common 

sense and suitable personal protective equipment when using the product.

Always check the performance of the machine combination to be used. It is important that 

these are compatible and work satisfactorily together. This is to ensure that the equipment 

or product works as expected, and to guarantee the safety of yourself and others. Carry out a 

visual inspection of the equipment or product before use. Repair or replace damaged or worn 

parts to reduce the risk of injury. Grease moving parts and check that all nuts and bolts are 

tightened. Correct if necessary.

Learn and remember the correct working method. Beginners must work slowly until they have 

learned how the machine or product works. Users/customers are responsible for ensuring us-

ers can handle the situation. If users feel that the machine is dangerous to use, it should not be 

used. Read the tractor’s operating manual before connecting the equipment. 

• 

Check and tighten all the bolts on the equipment!

• 

Check the oil level in the gearbox, top up if necessary.

• 

Check the cog belt’s tension, and adjust when necessary.

• 

Check that the flails are not defective, and replace if necessary.

FILLING AND CHECKING OIL IN THE ANGLE GEAR

The angle gear has a filler plug, level plug and drain plug.

• 

Checking

: Loosen the level plug (Allen screw) and check the level, top up if necessary.

• 

Refilling

: Loosen the filler plug and level plug. Fill until the oil is level with the level plug 

approx. 0.7 l

• 

Draining

 

when changing the oil

: Loosen the drain plug. Tip: Fit the hose in the hole and 

allow the oil to run in a container. 

BLEED PLUG/FILLER PLUG 

DRAINAGE PLUG

LEVEL PLUG

In order to ensure safety, the product must only be used in the manner prescribed in these in-
structions. It is the user’s responsibility to read through the instructions and comply with them.

Warning! 

Summary of Contents for 35-FMF275

























Reviews: