background image

6

Table of Contents

USE

Only those who understand the safety instructions and the operating manual may use the 

equipment or product. Exercise caution and care when working with the equipment or 

product and only use them in the way described in the instruction manual. 

There is a risk of crushing when working with equipment that has moving parts. Exercise 

caution when working with equipment with hydraulic hoses, as oil under pressure can 

penetrate the skin. Immediately seek medical attention if this should occur. Always work alone 

with equipment that is made for working alone. 

Respect the equipment's risk zone.

                 

  

For further information about your machine, read the machine's operating manual. 

DANGER!

CAUTION!

NOTE:

Warning symbols identify important safety aspects in this manual in order to help you and others avoid dangers 

and accidents. When using the machine: Be extremely careful! 

Warning! 

This symbol indicates that a serious accident will occur if the directions in the operating manual are not 
followed.  The accident will lead to serious injury, possibly death, or serious damage.

This symbol indicates that an accident will occur if the directions in the manual are not followed.  
The accident will lead to serious injury or damage.

This symbol indicates that an accident may occur if the directions are not followed. 
The accident will lead to injury or damage.

NOTE indicates the risk of a breakdown if the directions are not followed.

Where the machine is used professionally, employers are responsible for ensuring that users of the 

machine have theoretical and practical knowledge of the machine and that work is performed in 

a safe manner. Stay informed by complying with work environment legislation; contact your local 

work environment authority.

AFTER USE

• 

Ensure that the equipment/product is standing on level ground when it is disconnected. 

Use stabilisers, if these are included with the product/tool.

• 

Wash, rinse with water and dry if necessary.

• 

Re-lubricate if necessary.

Summary of Contents for 13-HK777

































Reviews: