Operating Manual PT 18x
15
Temperature measurement two-colour/ratio mode (Configuration
layer:
C001
)
Parameter Function
Explanation
E. 01
Enter a material con-
stant
e.g. 103 % (spheroidal graphite iron)
E. 02
Enter a material
constant
e.g. 101 % (grey cast iron)
E. 03
Enter a material
constant
10.2 Select the material constant
The CellaCast PT pyromter offers two ways to access the material con-
stants you have stored: either directly using
▲▼ or at the parameter set-
ting below:
Temperature measurement two-colour/ratio mode (Configuration
layer:
C001
)
Parameter Function
Explanation
E.IDX
Enter a material con-
stant
Choose a constant from the array, e.g.
E.
02
11
Further configuration
11.1 Automatic Temperature Detection (ATD)
This function serves to automatically detect the temperature during man-
ufacturing processes with discontinuous or intermittent material flow, for
example molten metal casting at foundries. These limits or thresholds
define the temperature range within which you wish to detect the tem-
perature. It is also possible to determine the average temperature value
over the course of multiple measuring cycles.