![background image](http://html2.mh-extra.com/html/keithley/tec-sourcemeter-2510/tec-sourcemeter-2510_user-manual_4099743143.webp)
10-4
SCPI Command Reference
Models 2510 and 2510-AT User’s Manual
Table 10-2
:FORMat subsystem commands
Command
Description
Default
parameter
SCPI
:FORMat
:BORDer <name>
Specify byte order when transferring binary
data. <name> =NORMal | SWAPped
Note
✓
:BORDer?
Query byte order.
✓
[:DATA] <type>[,<length>] Specify data format used when transferring
numeric data. Valid formats are: ASCii,
REAL, 32 and SREal. ASCii is the only per-
mitted input format regardless of this setting.
ASCii
✓
[:DATA]?
Query data format.
✓
:ELEMents <item list>
Specify desired data item: TEMPerature,
VOLTage, CURRent, POWer, RESistance,
TSENsor, TIME, and STATus.
TEMP, VOLT,
CURR, POW,
RES, TSEN,
TIME, STATus
:SREGister <type>
Type = ASCii, HEXadecimal, OCTal, or
BINary. Selects the output response format of
the Status Model registers.
ASCii
✓
:SREGister?
Query output response format.
:SOURce2 <type>
Type = ASCii, HEXadecimal, OCTal, or
BINary. Selects output response format of
Digital I/O settings.
ASCii
:SOURce2?
Query Digital I/O output response format.
Note: *RST default: NORMal
:SYSTem:PRESet default: SWAPped.
Table 10-3
OUTPut subsystem commands
Command
Description
Default
parameter
SCPI
:OUTPut[1]
✓
:ENABle
Path to control Digital I/O output enable line.
[:STATe] <b>
Activate (ON/1) or inactivate (OFF/0) enable line.
OFF
[:STATe]?
Query state of output enable line.
:TRIPped?
Output enable line tripped? (1 = no; 0 = yes.)
[:STATe]
Enable (ON/1) or disable (OFF/0) output.
OFF
✓
[:STATe]?
Query output state.
✓
Summary of Contents for TEC SourceMeter 2510
