manualshive.com logo in svg

Keithley SourceMeter 2601, User Manual

Share
Download
Keithley SourceMeter 2601 User Manual Download Page 48

3-2

Return to 

Section Topics

2600S-900-01 Rev. C / January 2008

Section 3: Test Script Processor Interaction

Series 2600 System SourceMeter

®

 Instruments User’s Manual

What is a script?

Reference

See “Programming overview” in Section 2 of the Keithley Instruments Series 2600 
System Series 2600

®

 Instruments Reference Manual for more information on script 

fundamentals.

A script is a collection of instrument control commands and programming statements to perform 
one or more operations or tasks. A script is stored in a Series 2600 and is run by its Test Script 
Processor (TSP). 

Factory scripts

The Series 2600 is shipped from the factory with at least one factory script stored in it’s non-
volatile memory. Each factory script is made up of a series of functions to perform specific tests. A 
factory script function can be called (run) from the front panel or called using remote programming. 
A factory script cannot be deleted from non-volatile memory. 

User scripts

A user script is a script created by a user using the Test Script Builder or an external program. The 
user script is loaded in the Series 2600 and stored in volatile or non-volatile memory. If stored in 
non-volatile memory, the script will not be lost when the instrument is turned off.

Keithley Instruments will be posting approved user scripts donated by registered users on its web 
site. You will be able to download these user scripts into your Series 2600. Visit www.keithley.com 
for details. 

How do I run a script from the front panel?

Reference

See “Factory scripts” and “User Scripts” in Section 2 of the Series 2600 Reference 
Manual for details on running scripts.

Choose to run scripts from the following options:

• Factory
• Users
• Scripts

All factory script functions are interactive if accessed from the front panel. This means you must 
manually enter the parameters. 

A user script can be non-interactive or interactive. A non-interactive script does not require user 
input.

NOTE If the Series 2600 is in remote operation, press the LOCAL key to 

return control to the front panel.

To run the script from the front panel:

 1. 

Press 

the 

LOAD

 key to display the LOAD TEST menu.

 

2.  Position the blinking cursor on the FACTORY or USER menu item and press 

ENTER

 (or the 

navigation wheel). Keep in mind that the Series 2600 is shipped with no user scripts loaded. 

 

3.  Position the blinking cursor on the test to be run, and then press 

ENTER

.

 4. 

Press 

the 

RUN

 key to start the test.

 

5.  Enter required test parameters using the front panel controls.

Summary of Contents for SourceMeter 2601



















































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands