Appendix C: LAN concepts and settings
Series 2600B System SourceMeter® Instrument Reference Manual
C-14
2600BS-901-01 Rev. C / August 2016
Searching for DNS server(s)
Starting DLLA Configuration
DLLA Failed
DLLA configuration started on xxx.xxx.xxx.xxx
Starting Manual Configuration
Manual configuration started on xxx.xxx.xxx.xxx
Closed
Viewing the network settings
To view the active network settings:
1. From the front panel, press the
MENU
key, and then select
LAN > STATUS
.
2. Use the navigation wheel to select one of the following network settings:
•
IP-ADDRESS
•
GATEWAY
•
SUBNET-MASK
•
METHOD
•
DNS
•
MAC-ADDRESS
1. Press the
ENTER
key to view the active setting.
2. Press the
EXIT (LOCAL)
key once to return to the STATUS menu.
Confirming the active speed and duplex negotiation
The Series 2600B automatically detects the speed and duplex negotiation active on the LAN. Once
the speed and duplex negotiation is detected, the instrument automatically adjusts its own settings to
match the LAN settings.
To confirm the active LAN speed and duplex mode:
1. From the front panel, press the
MENU
key.
2. Select
LAN > STATUS
.
3. Use the navigation wheel to select one of the following:
•
SPEED
•
DUPLEX
1. Press the
ENTER
key to view the active setting.
2. Press the
EXIT (LOCAL)
key once to return to the STATUS menu
