Series 2600B System SourceMeter® Instrument Reference Manual
Section 7: TSP command reference
2600BS-901-01 Rev. C / August 2016
7-393
Details
Releases a trigger that was asserted with an indefinite pulse width. It also releases a trigger that was
latched in response to receiving a synchronous mode trigger.
Example
tsplink.trigger[3].release()
Releases trigger line 3.
Also see
(on page 7-387)
(on page 7-388)
(on page 7-389)
(on page 7-391)
(on page 7-392)
(on page 7-394)
(on page 7-396)
tsplink.trigger[N].reset()
This function resets some of the TSP-Link trigger attributes to their factory defaults. This function is not available
on the Models 2604B/2614B/2634B.
Type
TSP-Link accessible
Affected by
Where saved
Default value
Function
Yes
Usage
tsplink.trigger[
N
].reset()
N
The trigger line (1 to 3)
Details
The
tsplink.trigger[
N
].reset()
function resets the following attributes to their factory
defaults:
•
tsplink.trigger[
N
].mode
•
tsplink.trigger[
N
].stimulus
•
tsplink.trigger[
N
].pulsewidth
This also clears
tsplink.trigger[
N
].overrun
.
Example
tsplink.trigger[3].reset()
Resets TSP-Link trigger line 3
attributes back to factory default
values.
Also see
(on page 7-389)
(on page 7-391)
(on page 7-392)
(on page 7-394)