Keithley SourceMeter 2600B Series, Reference Manual

Page: 259 / 897

Section 5: Introduction to TSP operation Series 2600B System SourceMeter® Instrument Reference Manual
5-6 2600BS-901-01 Rev. C / August 2016
Display
display.clear() (on page 7-66)
display.getannunciators() (on page 7-66)
display.getcursor() (on page 7-68)
display.getlastkey() (on page 7-69)
display.gettext() (on page 7-70)
display.inputvalue() (on page 7-72)
display.loadmenu.add() (on page 7-73)
display.loadmenu.catalog() (on page 7-75)
display.loadmenu.delete() (on page 7-75)
display.locallockout (on page 7-76)
display.menu() (on page 7-77)
display.numpad (on page 7-77)
display.prompt() (on page 7-78)
display.screen (on page 7-79)
display.sendkey() (on page 7-80)
display.setcursor() (on page 7-82)
display.settext() (on page 7-83)
display.smuX.limit.func (on page 7-84)
display.smuX.measure.func (on page 7-85)
display.smuX.digits (on page 7-84)
display.trigger.clear() (on page 7-86)
display.trigger.EVENT_ID (on page 7-86)
display.trigger.overrun (on page 7-87)
display.trigger.wait() (on page 7-87)
display.waitkey() (on page 7-89)
Error queue
When errors and events occur, the error and status messages are placed in the error queue. Use the
error queue commands to request error and status message information.
errorqueue.clear() (on page 7-90)
errorqueue.count (on page 7-91)
errorqueue.next() (on page 7-91)
Event log
You can use the event log to view specific details about LAN triggering events.
eventlog.all() (on page 7-92)
eventlog.clear() (on page 7-93)
eventlog.count (on page 7-94)
eventlog.enable (on page 7-94)
eventlog.next() (on page 7-95)
eventlog.overwritemethod (on page 7-96)