![background image](http://html2.mh-extra.com/html/keithley/series-2200/series-2200_reference-manual_4054426084.webp)
Series 2200 Programmable DC Power Supplies Reference Manual
Section 4: Command reference
2200S-901-01 Rev. C / March 2016
4-27
*SRE
Service request enable (SRE) sets and queries the bits in the
service request enable register (SRER). See Appendix C,
(on page C-3) for more information about SRER.
Group
Status
Syntax
*SRE <NR1>
*SRE?
Related
Commands
(on page 4-4)
(on page 4-8)
Arguments
<NR1>
is an integer value in the range from
0
to
255
. The binary
bits of the SRER are set according to this value. Using an out-of-
range value causes an execution error. The power-on default for
SRER is
0
if *PSC is
1
. If *PSC is
0
, the SRER maintains its value
through a power cycle.
Examples
*SRE 48
sets the bits in the SRER to
00110000
binary.
*SRE? might return a value of 32, showing that the bits in the
SRER have the binary value 00100000.
STATus:OPERation:CONDition? (query only)
This command returns the contents of the operation condition
register (OCR). Details on the OCR are available in Appendix C,
(on page C-3).
Group
Status
Syntax
*SRE <NR1>
*SRE?
Related
Commands
(on page 4-4)
(on page 4-8)
Arguments
<NR1>
is an integer value in the range from 0 to 255. The binary
bits of the service request enable register (SRER) are set according
to this value. Using an out-of-range value causes an execution
error. The power-on default for SRER is 0 if
*PSC
is
1
. If
*PSC
is
0
,
the SRER maintains its value through a power cycle.
Examples
*SRE 48
sets the bits in the SRER to
00110000
binary.
*SRE?
might return a value of
32
, showing that the bits in the