Section 2: S535 site preparation and installation
S535 Wafer Acceptance Test System Administrative Guide
2-28
S535-924-01 Rev. B / January 2019
Physically securing the system
You must bolt the S535 system cabinet to the floor for safety purposes and to ensure the cabinet will
not tip over.
The following figure shows the restraint brackets and bolt installation dimensions for the system
cabinet.
Figure 30: S535 system securement dimensions
The following figure shows how a floor-mounting bracket is installed. Keithley part numbers are
included for the required hardware.
Figure 31: S535 system cabinet floor mount
