Keithley KUSB-3160, Getting Started Manual

Page: 9 / 59

ix
About this Manual
This manual describes how to install and set up your KUSB-3160
module and device driver, and verify that your module is working
properly.
Intended Audience
This document is intended for engineers, scientists, technicians, or
others responsible for installing and setting up a KUSB-3160 module
to perform digital I/O operations. It is assumed that you are familiar
with the requirements of your application. It is also assumed that you
are familiar with the Microsoft
®
Windows
®
2000 or Windows XP
operating system.
How this Manual is Organized
This manual is organized as follows:
• Chapter 1 , “Overview,” describes the key features of the
KUSB-3160 hardware and software, and provides an overview of
the getting started procedure.
• Chapter 2 , “Preparing to Use a Module,” describes how to
unpack the KUSB-3160 package, check the system requirements,
and install the software.
• Chapter 3 , “Installing a Module and Configuring the Device
Driver,” describes how to install the KUSB-3160 module and
configure the device driver.
• Chapter 4 , “Wiring Signals,” describes how to attach the
KUSB-STP100 screw terminal panel and wire signals to the
KUSB-3160 module.