Keithley KUSB-3100, User Manual

Page: 95 / 129

Calibration
81
6
6
6
6
6
6
6
6
6
Using the KUSB-3100 Calibration Utility
Start the KUSB-3100 Calibration Utility by performing the following
steps:
1. Locate the KUSB-3100 program folder on your hard disk.
2. Double-click KUSB-3100 Calibration.Exe in the program folder.
The main menu appears.
3. Select the module to calibrate, then click OK .
Once the KUSB-3100 Calibration Utility is running, you can calibrate
the analog input circuitry (either automatically or manually),
described on
page 82 , or the analog output circuitry of the KUSB-3100
module, described on page 85 .