KPXI-CON-900-01 Rev. A / January 2007
Return to
B-11
KPXI System Controller User’s Manual
Appendix B: Award BIOS Setup Utility
Init Display First
This item allows you to decide to active whether PCI Slot or on-chip VGA first.
BIOS Write Protection
•
Enabled:
This option will protect the system from unnecessary updating or flashing of the
BIOS. When enabled, it secures the BIOS therefore any updates to the BIOS will not take
effect.
•
Disabled:
Disables the BIOS flash lock
function, allowing you to update or flash the BIOS
any time needed.
ENUM# signal redirect to
This item set ENUM# signal redirect to IRQ 3/4/5/7/11/12.
On-Chip VGA
This item will enable/disable On-Chip VGA. Once disabling, you must use another VGA card to
display the POST messages. The default is Enabled.
On-Chip Frame Buffer Size
This item set On-Chip VGA memory cache windows size.
Boot Display
You can use this item to CRT or CRT+DVI display.
Integrated Peripherals
Figure B-6
Integrated peripherals
Summary of Contents for KPXI
Page 96: ......