KPXI-CON-900-01 Rev. A / January 2007
Return to
1-11
KPXI System Controller User’s Manual
Section 1: Introduction
Shipment contents
The following items are included with every Model KPXI-CON series order:
• One of the following models of System Controllers (equipped with CPU, RAM and HDD):
– KPXI-CON-PM-1.8G:
3U
PXI system controller with Pentium M 1.8GHz CPU, 512MB
RAM, 40GB HDD
– KPXI-CON-PM-1.8G-PLUS: 3U Pentium M CPU module with Pentium M 1.8GHz CPU,
2GB memory, 80G HDD
– KPXI-CON-CM-1.3G: 3U PXI system controller with Celeron M 1.3GHz CPU, 512MB
RAM, 40GB HDD
• CD containing required software and manuals
• Windows XP CD
• Y-Cable for PS/2 Keyboard and Mouse
Inspection for damage
The Model KPXI-CON controller was carefully inspected electrically and mechanically before
shipment.
Inspect the controller carton for obvious damages. Shipping and handling may damage the
module. Make sure there are no shipping and handling damages on the controller’s carton before
continuing.
After opening the card module carton, extract the system module and place it only on a grounded
anti-static surface with component side up. Save the original packing carton for possible future
shipment.
Again, inspect the module for damages. Report any damage to the shipping agent immediately.
CAUTION:
This board must be protected from static
discharge and physical shock. Never
touch any of the socketed parts except at
a static-free workstation. Use the anti-
static bag shipped with the product to
handle the board. Wear a grounded wrist
strap when touching components.
CAUTION:
Your Model KPXI-CON controller
contains electro-static sensitive
components that can be easily be
damaged by static electricity.
Therefore, handle the controller on a
grounded anti-static mat. The operator
should be wearing an anti-static
wristband, grounded at the same point as
the anti-static mat.
Summary of Contents for KPXI
Page 96: ......
