Model 2450 Interactive SourceMeter® Instrument Reference Manual
Section 8: TSP command reference
2450-901-01 Rev. B/September 2013
8-105
smu.measure.limit[Y].clear()
This function clears the results of the limit test for the selected measurement function.
Type
TSP-Link accessible
Affected by
Where saved
Default value
Function
Yes
Usage
smu.measure.limit[
Y
].clear()
Y
1 or 2 for limit number
Details
Use this command to clear the test results of limit
Y
when the limit auto clear command is disabled. Both the high
and low test results are cleared.
To avoid the need to manually clear the test results for a limit, enable the auto clear command.
Example
smu.measure.func = smu.FUNC_DC_CURRENT
smu.measure.limit[2].clear()
Clears the test result for the high and low limit 2 for
current measurements.
Also see
smu.measure.limit[Y].autoclear
(on page 8-104)
