Keithley Interactive SourceMeter 2450 Reference Manual Download Page 23

Page: 23 / 878

Section 1: Introduction

Model 2450 Interactive SourceMeter® Instrument Reference Manual

1-2

2450-901-01 Rev. B/September 2013

CD-ROM contents

The following CD-ROMs are shipped with each Model 2450 instrument:

•

The Interactive SourceMeter

SMU Instruments Product Information CD-ROM (Keithley

Instruments part number 24GDI-950-01)

•

Test Script Builder Integrated Development Environment CD-ROM (Keithley Instruments part

number KTS-850)

•

Keithley KickStart Startup Software CD (Keithley Instruments part number KKS-850-01)

The Interactive SourceMeter SMU Instruments Product Information CD-ROM contains:

•

Quick Start Guide:

Provides unpacking instructions, describes basic connections, reviews basic

operation information, and provides a quick test procedure to ensure the instrument is

operational.

•

User's Manual:

Provides application examples that you can use as a starting point to create your

own applications.

•

Reference Manual:

Includes advanced operation topics, maintenance information,

troubleshooting procedures, optimization strategies, and in-depth descriptions of programming

commands.

•

KickStart Software Quick Start Guide:

Provides instructions to quickly make measurements

and get results without having to program test scripts.

•

Accessories information:

Documentation for accessories that are available for the Model 2450.

The Test Script Builder Integrated Development Environment CD-ROM contains:

The installation files for the Test Script Builder Integrated Development Environment: This software

provides an environment in which you can develop and execute a test program, and it gives you the

ability to load a test program onto the instrument. Running a program that is loaded on the instrument

eliminates the need to send individual commands from the host computer to the instrument when

running a test.

The Keithley KickStart Startup Software CD-ROM contains:

•

The KickStart software.

•

KickStart Software Quick Start Guide:

Provides instructions to quickly make measurements

and get results without having to program test scripts.

Summary of Contents for Interactive SourceMeter 2450















































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Interactive SourceMeter 2450

Reviews:

Brands by name

Popular brands

Keithley Interactive SourceMeter 2450, Reference Manual

Search results

Summary of Contents for Interactive SourceMeter 2450

Reviews:

Brands by name

Popular brands