Keithley DMM7510, Reference Manual, Page: 852 / 1036

Model DMM7510 7½ Digit Graphical Sampling Multimeter Reference Manual Section 8: TSP command reference
DMM7510-901-01 Rev. B / May 2015 8-239
scriptVar.source
This attribute contains the source code of a script.
Type TSP-Link accessible Affected by Where saved Default value
Attribute (R) No Not applicable Not applicable Not applicable
Usage
code = scriptVar .source
code
The body of the script
scriptVar The name of the variable that references the script that contains the source code
Details
The body of the script is a single string with lines separated by the new line character.
Example
print(test7.source)
Assuming a script named
test7
was created on the instrument, this example retrieves the source code.
Output:
reset()
display.settext(display.TEXT1, "Text on line 1")
display.settext(display.TEXT2, "Text on line 2")
Also see
scriptVar.save() (on page 8-238)
status.clear()
This function clears event registers and the event log.
Type TSP-Link accessible Affected by Where saved Default value
Function Yes
Usage
status.clear()
Details
This command clears the event registers of the Questionable Event and Operation Event Register
set. It does not affect the Questionable Event Enable or Operation Event Enable registers.
Example
status.clear() Clear the bits in the registers
Also see
*CLS (on page 2)