Section 8: TSP command reference
Model DMM7510 7½ Digit Graphical Sampling Multimeter Reference Manual
8-222
DMM7510-901-01 Rev. B / May 2015
localnode.linefreq
This attribute contains the power line frequency setting that is used for NPLC calculations.
Type
TSP-Link accessible
Affected by
Where saved
Default value
Attribute (R)
Yes
Power cycle
Not applicable
Not applicable
Usage
frequency
= localnode.linefreq
frequency
The detected line frequency: 50 or 60
Details
The instrument automatically detects the power line frequency (either 50 Hz or 60 Hz) when the
instrument is powered on.
Example
frequency = localnode.linefreq
print(frequency)
Reads line frequency setting.
Also see
None
localnode.model
This attribute stores the model number.
Type
TSP-Link accessible
Affected by
Where saved
Default value
Attribute (R)
Yes
Not applicable
Not applicable
Not applicable
Usage
model
= localnode.model
model
The model number of the instrument
Example
print(localnode.model)
Outputs the model number of the local node. For example:
DMM7510
Also see
(on page 8-225)