Model DMM7510 7½ Digit Graphical Sampling Multimeter Reference Manual
Section 2: General operation
DMM7510-901-01 Rev. B / May 2015
2-55
Examples in this manual
Many of the remote interface examples in this manual show only one function. The features may be
available for additional functions.
For example, many allow you to change the display digits.
The SCPI example shows only the DC voltage display digits command:
:DISPlay:VOLTage:DIGits 4
The example to change the number of displayed digits for TSP is shown as:
dmm.measure.func = dmm.FUNC_DC_VOLTAGE
dmm.measure.displaydigits = dmm.DIGITS_4_5
You can replace the SCPI
VOLTage
parameter or TSP
dmm.FUNC_DC_VOLTAGE
parameter with the
parameter for another function to set the display digits for that function.
The function parameters for SCPI are shown in the following table.
VOLTage[:DC]
TEMPerature
RESistance
VOLTage[:DC]:RATio
VOLTage:AC
CONTinuity
FRESistance
DIGitize:VOLTage
CURRent[:DC]
FREQuency[:VOLTage]
DIODe
DIGitize:CURRent
CURRent:AC
PERiod[:VOLTage]
CAPacitance
The function parameters for TSP are shown in the following table.
dmm.FUNC_DC_VOLTAGE
dmm.FUNC_RESISTANCE
dmm.FUNC_ACV_FREQUENCY
dmm.FUNC_AC_VOLTAGE
dmm.FUNC_4W_RESISTANCE
dmm.FUNC_ACV_PERIOD
dmm.FUNC_DC_CURRENT
dmm.FUNC_DIODE
dmm.FUNC_DCV_RATIO
dmm.FUNC_AC_CURRENT
dmm.FUNC_CAPACITANCE
dmm.FUNC_DIGITIZE_CURRENT
dmm.FUNC_TEMPERATURE
dmm.FUNC_CONTINUITY
dmm.FUNC_DIGITIZE_VOLTAGE
Display features
You can set the front-panel display to display the units of measure, number of digits, and customized
text messages for your applications.
Setting the number of displayed digits
You can change the number of digits that are displayed for measurement readings on the front panel
for some of the functions. For temperature, frequency, period, continuity, and capacitance, the
displayed digits are fixed and cannot be changed.