Keithley DMM7510, Reference Manual, Page: 721 / 1036

Section 8: TSP command reference Model DMM7510 7½ Digit Graphical Sampling Multimeter Reference Manual
8-108 DMM7510-901-01 Rev. B / May 2015
dmm.digitize.range
This attribute determines the positive full-scale measure range for digitizer.
Type TSP-Link accessible Affected by Where saved Default value
Attribute (RW) Yes Restore configuration
Instrument reset
Power cycle
Measure configuration list Configuration script Current: 1 A
Voltage: 10 V
Usage
value = dmm.digitize.range
dmm.digitize.range = value
value
Current: 10
µ
A to 3 A (front terminals) or 10 A (rear terminals)
Voltage: 100 mV to 1000 V
Functions
dmm.FUNC_DC_VOLTAGE dmm.FUNC_RESISTANCE dmm.FUNC_ACV_FREQUENCY
dmm.FUNC_AC_VOLTAGE dmm.FUNC_4W_RESISTANCE dmm.FUNC_ACV_PERIOD
dmm.FUNC_DC_CURRENT dmm.FUNC_DIODE dmm.FUNC_DCV_RATIO
dmm.FUNC_AC_CURRENT dmm.FUNC_CAPACITANCE dmm.FUNC_DIGITIZE_CURRENT
dmm.FUNC_TEMPERATURE dmm.FUNC_CONTINUITY dmm.FUNC_DIGITIZE_VOLTAGE
Details
When you assign a range value, the instrument selects a fixed range that is large enough to measure
the assigned value. The instrument selects the best range for measuring the maximum expected
value.
For example, for digitize current measurements, if you expect a reading of approximately 9 mA, set
the range to 9 mA to select the 10 mA range.
When you read this setting, you see the positive full-scale value of the measurement range that the
instrument is presently using.
Example
dmm.digitize.func = dmm.FUNC_DIGITIZE_VOLTAGE
dmm.digitize.range = 90
Set the range to 90 V, which selects the
100 V range
Also see
dmm.measure.range (on page 8-175)