Model DMM7510 7½ Digit Graphical Sampling Multimeter Reference Manual
Section 6: SCPI command reference
DMM7510-901-01 Rev. B / May 2015
6-177
TRIGger subsystem
The commands in this subsystem configure and control the trigger operations, including the trigger
model.
:ABORt
This command stops all trigger model commands on the instrument.
Type
Affected by
Where saved
Default value
Command only
Not applicable
Not applicable
Not applicable
Usage
:ABORt
Details
When this command is received, the instrument stops the trigger model.
Also see
(on page 3-76)
:INITiate[:IMMediate]
This command starts the trigger model.
Type
Affected by
Where saved
Default value
Command only
Not applicable
Not applicable
Not applicable
Usage
:INITiate[:IMMediate]
Also see
(on page 3-76)
