4-7
Figure 4-6. Attaching an EXP-GP Expansion Board
Refer to the EXP-GP expansion board documentation for more
information about this expansion board.
Attaching an MB Series Backplane
Refer to the
MB Series User’s Guide
for information on connecting
DAS-800 Series boards to MB Series backplanes.
Connecting Multiple Expansion Boards
You can daisy-chain up to eight EXP-16, EXP-16/A, and/or EXP-GP
expansion boards to provide up to 128 analog input channels. You
connect the first expansion board to the DAS-800 Series board by
attaching one end of an S-1800 or C-1800 cable to the main I/O connector
on the DAS-800 Series board and the other end of the cable to the J1
connector on the expansion board. To connect additional expansion
boards, attach one end of an S-1800 or C-1800 cable to the J2 connector
on the previous expansion board and the other end of the cable to the J1
connector on the next expansion board in the chain.
J2
J1
C-1800 / S-1800 Cable
Pin 1
Pin 1
EXP-GP
DAS-800 Series Board
J2
