Section 3: Using the web interface
Models 707B and 708B 199BSwitching Matrix User's Manual
3-4
707B-900-01 Rev. B / June 2013
Figure 11: Web interface Cards page
Open and close channels from the card pages
You can open and close channels from the card pages in several ways.
The simplest method is to click a connection. The channel changes state to open or closed. When the
channel is open, the connection will look similar to one of the following graphics (the actual item on
the web interface depends on the installed card):
Figure 12: Web interface open channel
Figure 13: Web interface relay open
When the channel is closed, the connection will look similar to one of the following:
Figure 14: Web interface closed channel
Figure 15: Web interface relay closed