Models 707B and 708B Switching Matrix Reference Manual
Section 7: Command reference
707B-901-01 Rev. A / August 2010
7-123
Details
This attribute can initialize the pseudo state to a known value.
Setting this attribute will not cause the LAN trigger to generate any events or output packets.
ON or OFF cannot be used when setting the pseudostate.
Example
print(lan.trigger[1].pseudostate)
Get the present simulated line state for the LAN
event 1.
Also see
None
lan.trigger[N].stimulus
This attribute specifies events that cause this trigger to assert.
Type
TSP-Link accessible
Affected by
Where saved
Default value
Attribute (RW)
Yes
System reset
LAN trigger N reset
Create
configuration script
0
Usage
triggerStimulus = lan.trigger[N].stimulus
lan.trigger[N].stimulus = triggerStimulus
triggerStimulus
The LAN event identifier used to trigger the event
N
A number specifying the trigger packet over the LAN for which to set or query
the trigger source (
1
to
8
)
Details
This attribute specifies which event causes a LAN trigger packet to be sent for this trigger. The events
(
triggerStimulus
) may be one of the existing trigger event IDs, shown in the following table.