Keithley 7070, Instruction Manual

Page: 16 / 73

GENERAL INFORMATION
1-2
The
CA UTION
heading used in this manual explains haz-
ards that could damage the adapter card. Such damage may
invalidate the warranty.
1.6 SPECIFICATIONS
Model 7070 speci Þ cations may be found at the front of this
manual. These speci Þ cations are exclusive of the matrix
mainframe speci Þ cations, which are located in the
Model 707 Instruction Manual.
1.7 UNPACKING AND INSPECTION
1.7.1 Inspection for Damage
Upon receiving the Model 7070, carefully unpack it from its
shipping carton and inspect the card for any obvious signs
of physical damage. Report any such damage to the ship-
ping agent immediately. Save the original packing carton for
possible future reshipment.
1.7.2 Shipment Contents
The following items are included with every Model 7070
order:
•
Model 7070 Universal Adapter Card.
•
Ribbon cable/extender board assembly.
•
Ribbon cable clips (5).
•
Model 7070 Instruction Manual.
•
Additional Accessories as ordered.
1.7.3 Instruction Manual
The Model 7070 Instruction Manual is three-hole drilled so
that it can be added to the three-ring binder of the
Model 707 Switching Matrix Instruction Manual. After
removing the plastic wrapping, place the manual in the
binder after the mainframe instruction manual. Note that a
manual identi
Þ cation tab is included and should precede
the adapter card instruction manual.
If an additional instruction manual is required, order the
manual package, Keithley part number 7070-901-00. The
manual package includes an instruction manual and any
pertinent addenda.
1.8 REPACKING FOR SHIPMENT
Should it become necessary to return the Model 7070 for
repair, carefully pack the unit in its original packing carton
or the equivalent, and include the following information:
•
Advise as to the warranty status of the adapter card.
•
Write ATTENTION REPAIR DEPARTMENT on the ship-
ping label.
•
Fill out and include the service form located at the back of
this manual.