Keithley 7001, Instruction Manual, Page: 289 / 353

8
Replacable Parts
8.1 Introduction
This section contains information concerning replace-
ment parts, schematic diagrams, component layouts,
and procedures for obtaining factory service for the
Model 7001.
8.2 Electrical components list
Electrical components for the Model 7001 can be ob-
tained from Keithley. Component designations and lo-
cations can be checked using the schematic and
component diagrams. The parts list, shown later in this
section, specifies components alphabetically, in order
of circuit designation.
NOTE
Most components within the Model
7001 are soldered in place using sur-
face-mount assembly techniques. Re-
placement
of such components
requires special equipment and exper-
tise. Refer repair of such boards to
qualified personnel or the factory.
8.3 Mechanical parts
The part numbers for the various mechanical parts and
assemblies of the Model 7001 are listed on the assembly
drawings included at the end of Section 7.
8.4 Ordering information
Keithley Instruments, Inc. maintains a complete
inventory of all normal replacement parts. To place an
order, or to obtain information concerning replacement
parts, contact your local Keithley representative, or the
factory:
Keithley Instruments, Inc.
28775 Aurora Road
Cleveland, OH 44139
(440) 248-0400
When ordering parts, include the following informa-
tion:
1. Instrument model number.
2. Instrument serial number.
3. Part description.
4. Circuit designation, including (if applicable) the
numbers of the schematic and component layout
diagrams where the component appears.
5. Keithley part number.
8.5 How to obtain factory service
If the instrument or associated accessories are to be re-
turned to the factory for service, carefully pack them
(preferably in the original carton), and include the fol-
lowing information:
8-1
Artisan Scientific - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisan-scientific.com