Keithley 6487, Reference Manual, Page: 222 / 338

14-18 SCPI Reference Tables Model 6487 Reference Manual
Table 14-9
TRIGger command summary
Command Description
Default
parameter
Ref
Section SCPI
:INITiate Path to initiate measurement cycle(s): 7
√
[:IMMediate] Initiate one trigger cycle.
√
:ABORt Reset trigger system (goes to idle state).
√
:ARM[:SEQuence[1]] Path to configure arm layer:
√
[:LAYer[1]]
:SOURce <name> Select control source: IMMediate, TIMer,
BUS, TLINk, MANual, PSTest, NSTest, or
BSTest.
IMM
√
:SOURce? Query arm control source.
√
:COUNt <n> Set measure count: 1 to 2048 or INF (infinite). 1
1 √
:COUNt? Query measure count.
√
:TIMer <n> Set timer interval: 0.001 to 99999.999 (sec). 0.100
√
:TIMer? Query timer interval.
√
[:TCONfigure]
√
:DIRection <name> Enable (SOURce) or disable (ACCeptor)
bypass.
ACC
√
:DIRection? Query arm source bypass.
√
[:ASYNchronous] Configure input/output triggers:
:ILINe <NRf> Select input trigger line: 1, 2, 3, 4, 5, or 6. 1
:ILINe? Query input trigger line.
:OLINe <NRf> Select output trigger line: 1, 2, 3, 4, 5, or 6. 2
:OLINe? Query output trigger line.
:OUTPut <name> Output trigger (TRIGger) or not at all
(NONE).
NONE
:OUTPut? Query output trigger status.
1.
*RST default is 1. SYST:PRES default is INF.