Model 6487 Reference Manual
SCPI Reference Tables
14-3
:CALCulate[1]
:KMATh
:MA0Factor <NRf>
Set “b” for mX+b and m/X+b calculation
(same as MBFactor).
1.0
:MA0Factor?
Query “b” factor (same as MBFactor?).
:MUNits <name>
Specify units for mX+b or m/X+b result:
1 character: A–Z, ‘[‘=
Ω
, ‘\’=°, ‘]’=%.
“X”
:MUNits?
Query units.
:STATe <b>
Enable or disable CALC1 calculation.
OFF
√
:STATe?
Query state of CALC1 calculation.
√
:DATA?
Return all CALC1 results triggered by INITiate.
√
:LATest?
Return last (latest) reading.
:CALCulate2
Path to configure and control limit testing
(CALC2):
√
:FEED <name>
Select input path for limit testing: CALCulate[1]
or SENSe[1].
SENS
√
:FEED?
Query input path for limit tests.
√
:LIMit[1]
Limit 1 Testing:
√
:UPPer
Configure upper limit:
√
[:DATA] <n>
Set limit: -9.99999e20 to 9.99999e20.
1.0
√
[:DATA]?
Query upper limit.
√
:SOURce2 <NDN> or
<NRf>
Specify 4-bit I/O “fail” pattern (0 to 15).
15
(see
note)
√
:SOURce2?
Query output pattern value.
√
:LOWer
Configure lower limit:
√
[:DATA] <n>
Set limit: -9.99999e20 to 9.99999e20.
-1.0
√
[:DATA]?
Query lower limit.
√
:SOURce2 <NDN> or
<NRf>
Specify 4-bit I/O “fail” pattern (0 to 15).
15
(see
note)
√
SOURce2 parameter values:
<NRf> =
0 to 15 Decimal format
<NDN> =
#Bxxxx Binary format (each x = 1 or 0)
=
#Hx
Hexadecimal format (x = 0 to F)
=
#Qxx
Octal format (x = 0 to 17)
Table 14-1 (cont.)
CALCulate command summary
Command
Description
Default
parameter
Ref
Section SCPI
