Model 6487 Reference Manual
Getting Started
1-5
Power-up
Line power connection
Follow the procedure below to connect the Model 6487 to line power and turn on the
instrument.
1.
Check to see that the line voltage indicated in the window of the fuse holder assem-
bly (
) is correct for the operating voltage in your area. If not, refer to the
for setting line voltage and fuse replacement.
`^rqflk
Operating the instrument on an incorrect line voltage may cause dam-
age to the instrument, possibly voiding the warranty.
Figure 1-1
Rear panel
2.
Before plugging in the power cord, make sure that the front panel power switch is
in the off (O) position.
3.
Connect the female end of the supplied power cord to the AC receptacle on the rear
panel. Connect the other end of the power cord to a grounded AC outlet.
120
LINE RATING
50, 60Hz
50 VA MAX
INPUT
(CHANGE IEEE ADDRESS
WITH FRONT PANEL MENU)
IEEE-488
CAT
I
TRIGGER LINK
RS-232
MADE IN
U.S.A.
ANALOG OUT
DIGITAL I/O
INTERLOCK
505V
MAX
V-SOURCE OUTPUT
505V PK TO CHASSIS
LO
HI
!
!
FUSE
LINE
400mAT
(SB)
100 VAC
120 VAC
200mAT
(SB)
220 VAC
240 VAC
505V PK
505V PK
505V PK
Powe
r
Mo
d
ule
