4200-900-01 Rev. K / February 2017
Return to
2-43
Model 4200-SCS User’s Manual
Section 2: Model 4200-SCS Software Environment
•
Column
: Lists the parameter’s Data, Calc, or Append worksheet column label (A, B, C, and
so on).
•
X, Y1,
and
Y2:
Are the axes of the graph, as follows:
– X is the X axis.
– Y1 is the Y axis on the left side of the graph.
– Y2 is the Y axis on the right side of the graph.
NOTE
The scale and label of the Y2 axis are allowed to be different from the scale and label
of the Y1 axis.
The cells under the X, Y1, and Y2 may be selected and deselected by clicking the boxes.
– If you select a cell under X, the corresponding Data Series
parameter is plotted on the X
axis. KITE can plot multiple parameters on the X axes when the test does not define a
family of curves (see the
Reference Manual, Allow Multiple X’s, page 6-212
).
– Similarly, if you select a cell under Y1 or Y2, the corresponding Data Series parameter is
plotted on the Y1 axis or the Y2 axis. KITE can plot multiple parameters on the Y1 and Y2
axes.
Understanding buttons in the Graph Definition window
The buttons of the Graph Definition window are used as follows:
•
Clear all:
Click the
Clear All
button to clear all selections under columns X, Y1, and Y2.
NOTE
If you click the
Clear All
button by mistake, click the
Cancel
button to exit the Graph
Definition window without making any changes.
•
Axis properties
: A click of the axis properties
button opens the axis properties window. You
can also open the axis properties window by selecting axis properties
in the graph settings
menu. Before using the axis properties window, refer to the
Reference Manual, Defining the
axis properties of the graph, page 6-212
Opening and using the Graph Definition window
To open and use the Graph Definition window:
1. In the Graph tab, display the graph settings menu by right-clicking the graph or by selecting
Tools
>
Graph Settings
.
2. In the graph settings menu, select
Define
Graph.
The Graph Definition window opens.
3. Using the Graph Definition window, indicate which parameters are to be plotted and assign
them to appropriate axes by selecting the appropriate X, Y1, and Y2 cells.
Summary of Contents for 4200-SCS
Page 2: ......
Page 4: ......
Page 334: ...Index 6 4200 900 01 Rev K February 2017 Model 4200 SCS User s Manual Index...