4200-900-01 Rev. K / February 2017
Return to
2-23
Model 4200-SCS User’s Manual
Section 2: Model 4200-SCS Software Environment
Executing an individual test
Selecting a test
An enabled (check marked) ITM or UTM is selected by clicking the test in the project navigator
(see
). The Run Test / Plan button
turns green to indicate that the test is enabled
and ready to be run. Also, the selected-test name is displayed in the Test / Plan Indicator box
located above the project navigator.
The test can also be selected by double-clicking it in the project navigator. The double-click action
places the appropriate ITM or UTM window in the KITE workspace. The ITM and UTM definition
tabs show the test configurations.
*1
See
NOTE
Before executing a test for which data must be labeled with a specific site number,
refer to the
Reference Manual, Assigning a site-number label to individual test and
.
Running the test
To run a selected test:
1. Click the green
Run Test / Plan
button
2. Select
Run
in the Run menu, or press the
F6
keyboard key.
While the test is running, test data is placed the data sheet. In ITMs data is placed in the data
sheet real time as data is being acquired. In UTMs by default, data is not placed in the data sheet
until after the test has finished running.
In the message area of the KITE window, time stamps indicate:
• Start time
• Stop time
• Total execution time
NOTE
You can also start a test by pressing the
F6
keyboard key. You can abort a test by
clicking the red
Abort Test / Plan
toolbar button, by selecting Abort in the Run menu,
or by pressing the
PAUSE / BREAK
keyboard key.
For detailed information about running individual tests, see
Reference Manual, Run execution of
individual tests and test sequences, page 6-162
.
1. For details about using the ITM and UTM definition tabs, see
Reference Manual, Configuring the Project Plan ITMs,
, and
Configuring the UTMs on page 6-142
.
Summary of Contents for 4200-SCS
Page 2: ......
Page 4: ......
Page 334: ...Index 6 4200 900 01 Rev K February 2017 Model 4200 SCS User s Manual Index...