Keithley 3700A Series, Reference Manual

Page: 785 / 936

Section 11: TSP command reference Series 3700A System Switch/Multimeter Reference Manual
11-406 3700AS-901-01 Rev. D/June 2018
trigger.blender[N].clear()
This function clears the blender event detector and resets the overrun indicator of blender
N
.
Type TSP-Link accessible Affected by Where saved Default value
Function Yes
Usage
trigger.blender[ N ].clear()
N
The blender number (up to two)
Details
This command sets the blender event detector to the undetected state and resets the overrun
indicator of the event detector.
Example
trigger.blender[2].clear()
Clears the event detector for blender 2.
Also see
None
trigger.blender[N].EVENT_ID
This constant contains the trigger blender event number.
Type TSP-Link accessible Affected by Where saved Default value
Constant Yes
Usage
eventID = trigger.blender[ N ].EVENT_ID
eventID
Trigger event number
N
The blender number (up to two)
Details
Set the stimulus of any trigger object to the value of this constant to have the trigger object respond to
trigger events from this trigger blender.
Example
digio.trigger[1].stimulus = trigger.blender[2].EVENT_ID
Set the trigger stimulus of
digital I/O trigger 1 to be
controlled by the trigger
blender 2 event.
Also see
None