Keithley 3700A Series, Reference Manual

Page: 395 / 936

Section 11: TSP command reference Series 3700A System Switch/Multimeter Reference Manual
11-16 3700AS-901-01 Rev. D/June 2018
Details
This function returns
result
, which is the result of toggling the bit
index
in
value
.
Any fractional part of
value
is truncated to make it an integer. The returned value is also an integer.
The least significant bit of
value
is at
index
position 1; the most significant bit is at
index
position 32.
The indexed bit for
value
is toggled from 0 to 1, or 1 to 0.
Example
testResult = bit.toggle(10, 3)
print(testResult)
The binary equivalent of decimal 10 is 1010. Toggling
the bit at
index
position 3 returns a decimal value of 14
(binary 1110).
Output:
1.01
Also see
Bit manipulation and logic operations (on page 9-21)
bit.clear() (on page 11-11)
bit.get() (on page 11-11)
bit.set() (on page 11-13)
bit.test() (on page 11-15)
bufferVar.appendmode
This attribute sets the state of the reading buffer's append mode.
Type TSP-Link accessible Affected by Where saved Default value
Attribute (RW) Yes Instrument reset
Recall setup Create configuration script
Saved setup See Details
Usage
state = bufferVar .appendmode
bufferVar .appendmode = state
state
The reading buffer append mode; set to one of the following:
▪
0
: Append mode off; new measurement data overwrites the previous buffer
content
▪
1
: Append mode on; appends new measurement data to the present buffer
content
bufferVar
The reading buffer