Section 10: Instrument programming
Series 3700A System Switch/Multimeter Reference Manual
10-38
3700AS-901-01 Rev. D/June 2018
Connecting an instrument in TSB
To connect the Test Script Builder software to an instrument:
1. Click the
Open Instrument
icon in the script editor toolbar.
Figure 122: Opening an instrument connection in TSB
2. The Select Instrument dialog box opens. Select an existing instrument from the list, or type the
VISA resource ID of the instrument in the
Select or enter new instrument
box.
3. If needed, enter a password.
Figure 123: Select Instrument dialog box
4. Click
OK
. You briefly see the Opening Resource dialog box, and then the instrument is visible in
the Instrument Console.
Figure 124: Instrument connected in TSB
