Keithley 2601A User Manual Download Page 43 | Manualshive

Page: 43 / 94

Keithley 2601A User Manual Download Page 43

2600AS-900-01 Rev. B / September 2008

Return to

Section Topics

2-11

Series 2600A System SourceMeter® Instruments User’s Manual

Section 2: Remote Operation

2.

Use the drop-down arrow to change folders, and navigate to the desired file.

3.

In the

File name

field, type the name of the file and then click

Save

.

How do I use Test Script Builder?

Step 1: Run Test Script Builder

Run the Test Script Builder program from the Keithley Instruments folder in the usual manner. The
initial startup screen shown in

will be displayed. The main sections of the screen are

briefly described below:

Main Bar

The menu contain following options:

•

File:

Use this option to control projects and files.

•

Edit:

Performs a number of editing functions on script files.

•

Navigate:

Navigates through projects.

•

Project:

Opens, closes, and builds projects.

•

Run:

Runs scripts.

•

Window

: Selects which window to display.

•

Help

: Provides access to online help files.

Project Navigator pane

The windowpane on the left side is where the Project Navigator is located. The navigator consists
of created project folders and the script files (.tsp) created for each project. Each project folder can
have one or more script files.

Script Development pane

The script chunk is written in the upper windowpane. It is in this area that scripts are written and/or
modified. Notice that there is a tab available for each opened script file. A script project is then
downloaded to the Series 2600A and run.

Series 2600A/Script Interaction pane

A number of tabs in the lower windowpane provide additional interaction between the Test Script
Builder, the Series 2600A and the opened script (the tabs displayed will depend on those selected
in the menu).

«
...
41
42
43
44
45
...
»

Summary of Contents for 2601A































































































Reviews:

No comments