Keithley 2600a series, Reference Manual, Page: 471 / 696

2600AS-901-01 Rev. B / September 2008 Return to Section Topics 19-149
Series 2600A System SourceMeter® Instruments Reference Manual Section 19: Remote Commands
smuX.trigger.source.stimulus X = SMU channel (a or b)
Attribute Selects the event which causes the source event detector to enter the detected state.
Default 0
TSP-Link
accessibility
This attribute can be accessed from a remote TSP-Link node.
Usage
eventid = smuX.trigger.source.stimulus -- Reads source action trigger.
smuX.trigger.source.stimulus = eventid -- Writes source action trigger.
eventid
Event that triggers the source action.
Remarks • Set this attribute to zero to bypass waiting for an event.
• Set this attribute to the event ID of any trigger event generator to wait for that event.
• The SMU will automatically clear all event detectors when the
smuX.trigger.initiate
function is executed. This function should be called after the sweep is initiated.
Also see
smuX.trigger.initiate
smuX.trigger.SOURCE_COMPLETE_EVENT_ID
X = SMU channel (a or b)
Attribute The source complete event number.
TSP-Link
accessibility
This attribute can be accessed from a remote TSP-Link node.
Usage
event_id = smuX.trigger.SOURCE_COMPLETE_EVENT_ID
event_id
Source action complete event number.
Remarks • Set the stimulus of any trigger event detector to the value of this constant to have it respond to
source complete events from this SMU.
smuX.trigger.SWEEP_COMPLETE_EVENT_ID
X = SMU channel (a or b)
Attribute The sweep complete event number.
TSP-Link
accessibility
This attribute can be accessed from a remote TSP-Link node.
Usage
event_id = smuX.trigger.SWEEP_COMPLETE_EVENT_ID
event_id
Sweep complete event number.
Remarks • Set the stimulus of any trigger event detector to the value of this constant to have it respond to
sweep complete events from this SMU.
smuX.trigger.SWEEPING_EVENT_ID
X = SMU channel (a or b)
Attribute The sweeping event number.
TSP-Link
accessibility
This attribute can be accessed from a remote TSP-Link node.
Usage
event_id = smuX.trigger.SWEEPING_EVENT_ID
event_id
Sweeping event number.
Remarks • Set the stimulus of any trigger event detector to the value of this constant to have it respond to
sweeping events from this SMU.