manualshive.com logo in svg

Keithley 2600a series, Reference Manual, Page: 401 / 696

Share
Download
Keithley 2600a series Reference Manual Download Page 401

2600AS-901-01 Rev. B / September 2008

Return to 

Section Topics

19-79

Series 2600A System SourceMeter® Instruments Reference Manual

Section 19: Remote Commands

lan.status.speed

 

Attribute

LAN speed.

TSP-Link 
accessibility

This attribute can be accessed from a remote TSP-Link node.

Usage

speed = lan.status.speed

speed

LAN speed setting.

Remarks

• Provides the transmission speed in use on the LAN. 
• The value 

speed

 is measured in Mbps. 

Example

print(lan.status.speed)

Output:

10

lan.status.subnetmask

 

Attribute

LAN subnet mask. 

TSP-Link 
accessibility

This attribute can be accessed from a remote TSP-Link node.

Usage

mask = lan.status.subnetmask

mask

 Returns the LAN subnet mask.

Remarks

• Indicates the LAN subnet mask in use.
• The value for 

mask

 is a string formatted in dotted decimal notation. 

lan.timedwait

 

Attribute

The LAN timed-wait state interval

Default

20

TSP-Link 
accessibility

This attribute can be accessed from a remote TSP-Link node.

Usage

lan.timedwait = timeout

timeout = lan.timedwait

timeout

Retrieves the LAN timed-wait state interval in seconds.

Remarks

• Use the value 

timeout

 as input or to set values for other attributes.

• This attribute controls the amount of time resources are allocated to closed TCP connections. 
• A timed-wait state occurs if a TCP connection is closed.
• During the time-wait state interval, the instrument processes delayed packets that arrive after the 

connection is closed. 

• Use this attribute to tailor the timed-wait state for the instrument. 

Summary of Contents for 2600a series

























































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments