Keithley 2461, Reference Manual, Page: 596 / 1109

Model 2461 Interactive SourceMeter® Instrument Reference Manual Section 6: SCPI command reference
2461-901-01 A/November 2015 6-219
Details
Sets the IP address for outgoing trigger events.
After you change this setting, you must send the connect command before outgoing messages can
be sent.
Example
TRIG:LAN1:OUT:IP:ADDR "192.0.32.10"
Use IP address
192.0.32.10
to connect the
LAN trigger.
Also see
:TRIGger:LAN<n>:OUT:CONNect:STATe (on page 6-218)
:TRIGger:LAN<n>:OUT:LOGic
This command sets the logic on which the trigger event detector and the output trigger generator operate on the
given trigger line.
Type Affected by Where saved Default value
Command and query
Recall settings
Instrument reset
Power cycle
Save settings NEG
Usage
:TRIGger:LAN<n>:OUT:LOGic <logicType>
:TRIGger:LAN<n>:OUT:LOGic?
<n>
The LAN event number (1 to 8)
<logicType>
The type of logic:
•
POSitive
•
NEGative
Example
TRIG:LAN1:OUT:LOG POS
Set the logic to positive.
Also see
None