Series 2280 Precision DC Power Supply Reference Manual
Section 7: SCPI command reference
077085503 / March 2019
7-143
:TRACe[n]:SAVE
This command saves data from the specified reading buffer to a USB flash drive.
Type
Affected by
Where saved
Default value
Command only
Not applicable
Not applicable
Not applicable
Usage
:TRACe[n]:SAVE <fileName>
:TRACe[n]:SAVE <fileName>, <timeFormat>
:TRACe[n]:SAVE <fileName>, <timeFormat>, <start>, <end>
[n]
Channel number: For single-channel instruments, the value is
1
<
fileName
>
A string that indicates the name of the file on the USB flash drive in which to save
the reading buffer
<
timeFormat
>
Defines which information is saved in the file on the USB flash drive:
Dates, times, and fractional seconds are saved; the default value:
TSTamp
Relative time stamps (in seconds) are saved:
RELative
Relative time stamps are saved:
RSTamp
For details about time format, see
(on page 7-136)
<
start
>
Defines the starting point in the buffer to start saving data
<
end
>
Defines the ending point in the buffer to stop saving data
Details
For options that save more than one item of time information, each item is comma-delimited. For
example, the default format is date, time, and fractional seconds for each reading.
Example
:TRAC:SAVE "myData"
:TRAC:SAVE "myDataRel", REL
:TRAC:SAVE "myDataRel100",REL,1,100
Save all readings and default time information to a file
named
myData.csv
on the USB flash drive.
Save all readings and relative time stamps to a file
named
myDataRel.csv
on the USB flash drive.
Save the buffer readings from 1 through 100 to a file
named
myDataRel100.csv
on the USB flash drive.
Also see
None
