Section 5: SCPI command reference Model 2231A Triple-channel DC Power Supply Reference Manual
5-8
077100401/September 2014
This command is to set the voltage calibration points. P1, P2, P3 and P4 must be calibrated in numeric order.
Item
Description
Group
Calibration
Syntax
CALibrate:VOLTage:LEVel <level>
Argument
P1|P2|P3|P4
Returns
None
Examples
Cal:volt:lev P1
CALibrate:VOLTage[:DATA] <numeric value>}
This command is to return the actual output voltage value of the calibration point.
Item
Description
Group
Calibration
Syntax
CALibrate:VOLTage[:DATA] <NRf>
Argument
Voltage level
Returns
<NRf>
Examples
CAL:VOLT 30.0002V
CALibrate:CURRent:LEVel
This command is to set the current calibration points. P1, P2 must be calibrated in numeric order.
Item
Description
Group
Calibration
Syntax
CALibrate:CURRent:LEVel <level>
Arguments
P1|P2
Returns
<NRf>
Examples
Cal:curr P1
CALibrate:CURRent[:DATA] {<numeric value>}
This command is to return the actual output current value of the calibration point.
Item
Description
Group
Calibration
Syntax
CALibration:CURRent [:DATA] <NRf>
Arguments
Current level
Item
Description
Returns
None
Examples
CAL:CURR 3.0002A