Keithley 2182, User Manual, Page: 26 / 339

If an additional manual is required, order the appropriate manual package. The manual
packages include a manual and any pertinent addenda.
Options and accessories
The following options and accessories are available from Keithley for use with the
Model 2182.
Cables, connectors, and adapters
Models 2107-4 and 2107-30 Input Cable — Connect the Model 2182 Nanovoltmeter to
DUT using one of these input cables. The input cable is terminated with a LEMO connector (for
connection to the Model 2182) on one end and four copper spade lugs (for connection to DUT)
on the other. The Model 2107-4 (which is a supplied accessory to the Model 2182) is 1.2m (4 ft)
in length and the Model 2107-30 is 9m (30 ft) in length. Also included are four copper alligator
clips that attach to the copper lugs of the cable, and DeoxIt copper cleaning solution.
Model 2182-KIT Low Thermal Connector — Consists of a low-thermal LEMO connector
and strain relief. Includes all the connector parts required to build a custom input cable for the
Model 2182 Nanovoltmeter.
Model 2187-4 Input Cable — Low-thermal input cable for the Model 2182/2182A. Termi-
nated with a LEMO connector on one end and four banana plugs on the other. The cable is 4 ft
(1.2m) in length.
Model 2188 Low-Thermal Calibration Shorting Plug — This input shorting plug is
required to calibrate the Model 2182 Nanovoltmeter.
Models 7007-1 and 7007-2 Shielded GPIB Cables — Connect the Model 2182 to the GPIB
bus using shielded cables and connectors to reduce electromagnetic interference (EMI). The
Model 7007-1 is 1m long; the Model 7007-2 is 2m long.
Model 7009-5 Shielded RS-232 Cable — 1.5m (5 ft) RS-232 cable terminated with a male
DB-9 connector on one end and a female DB-9 connector on the other end. It is wired as a
straight through (not null modem) cable.
Models 8501-1 and 8501-2 Trigger Link Cables — Connect the Model 2182 to other
instruments with Trigger Link connectors (e.g., Model 7001 Switch System). The Model 8501-
1 is 1m long; the Model 8501-2 is 2m long.
Model 8502 Trigger Link Adapter — Lets you connect any of the six Trigger Link lines of
the Model 2182 to instruments that use the standard BNC trigger connectors.
Model 8503 DIN to BNC Trigger Cable — Lets you connect Trigger Link lines one
(Voltmeter Complete) and two (External Trigger) of the Model 2182 to instruments that use
BNC trigger connectors. The Model 8503 is 1m long.
Silver solder
2182-325A — Use this Keithley part number to order a 20-foot length of silver solder. Also
included is an MSDS sheet listing the solder chemical contents.
1-4 Getting Started