Keith McMillen Instruments QuNexus RED, User Manual

Page: 29 / 49

Q
u
N
exus
e
diTOr
29
Q
u
N
exus
2.0
4.4 s
yNCiNG The
Q
u
N
exus aNd
e
diTOr
When you connect a QuNexus to the Editor, a window will pop up asking you to choose a Sync Method� This is
so that you don’t accidentally overwrite an editor preset you’re currently working on, or so you can save settings
from the QuNexus hardware to a new editor preset�
Editor to QuNexus - Sends the current editor preset to the QuNexus�
QuNexus to Editor - Loads the QuNexus hardware settings, overwriting the current editor settings�
QuNexus to Editor (new) - Loads the QuNexus hardware settings into the Editor as a new preset�
4.5 M
aiN
W
iNdOW
O
vervieW
You can create and save custom controller mappings for the QuNexus using the Keyboard, Controller and CV
Layers�
At the bottom of the Editor window are the Keyboard Sensitivity Settings to control the On Threshold, Off
Threshold, Global, Tilt, and Pressure sensitivity of the QuNexus keys�
Keyboard Layer, Sequencer/Arpeggiator, Controller Layer, CV Layer and Settings are accessed with their
respective tabs� Keyboard Layer is the main window for editing QuNexus behavior� The Sequencer tab is the
main window for editing Sequencer and Track settings� The Controller Layer is where you can assign additional
Notes, Pressure and Tilt CC#s for each Key� CV Layer is for editing CV inputs and outputs� The Settings layer is to
adjust LED and MIDI Thru settings
Tools for Preset management are found on the right side of the window�
4.6 p
reseT
M
aNaGeMeNT
Select Presets by double clicking on them in the Library� The selected Preset will be highlighted RED and you
can make changes to the Preset� The Preset name will turn orange and an asterisk will appear next to it to
indicate it has unsaved changes� You can use the Revert button or the Save button under the Preset Library to
discard or keep your changes� The Revert button will go back to the previously saved version of the preset�