Keith McMillen Instruments QuNexus RED, User Manual

Page: 17 / 49

Q
u
N
exus
h
ardWare
17
Q
u
N
exus
2.0
2.5 e
xpressiON
p
edal
When an expression pedal is plugged into the CV input of QuNexus, the expression pedal data will be converted
to MIDI CC# 112 or 113 on Channel 2 and go from 0 - 127� This behavior can be changed using the QuNexus
Editor� See the Chapter on CV Layer for more information�
NOTE: Not all Expression Pedals are made equal, and some are noisier than others� We recommend the Roland EV-5�
2.6 C
ONTrOlliNG
led
s
LEDs can be controlled by sending MIDI Notes through USB Port 1 to the QuNexus� Notes 48 (C2) - 72(C4)
will control the keyboard LEDs� If you send notes outside of that range, they will wrap around and still control
the QuNexus keyboard LEDs� Channel 1 is used as the default LED Input channel, but the Channel number is
editable using the QuNexus Editor�
See the LED Mode chapter for more information�