![Keith McMillen Instruments QuNexus RED User Manual Download Page 14](http://html1.mh-extra.com/html/keith-mcmillen-instruments/qunexus-red/qunexus-red_user-manual_3937684014.webp)
Q
u
N
exus
h
ardWare
14
Q
u
N
exus
2.0
2.2.3 Cv
QuNexus can control modular synthesizers and other CV devices using Control Voltages�
2.2.3.1 Cv C
able
C
ONNeCTiONs
There are 2 CV output ports on the left side of the QuNexus and 1 CV input port on the right side�
Outputs - The two output ports use stereo 1/8” TRS connectors and provide 4 outputs: a Gate
Output and three 16-bit CV Outputs� Output voltages range from 0 to 5V�
Inputs - The input port should be used with a TRRS connector to access both CV Inputs and the 5V
Power for an expression pedal� QuNexus’ CV In is uni-polar� If you send it a bi-polar signal, half of the
signal will be clipped (which can cause malfunctions in extreme cases�) Sending a signal above 5V is
also unsupported�
These are the 2 types of plugs that are required to plug QuNexus into a CV device� The TRS type is
for the CV output ports and the TRRS type is for the CV input port�
2.2.3.2 Cv C
able
k
iT
The QuNexus CV Cable Kit is an optional QuNexus accessory that comes with all the cables and
adapters needed to connect QuNexus to your CV ins and outs�
The QuNexus CV Cable Kit comes with the following 5 cables:
CV INPUT:
•
1 right angle 3�5mm (1/8”) stereo plug to ¼” stereo jack
•
1 3�5mm (1/8”) stereo plug to ¼” mono jack
•
1 3�5mm (1/8”) TRRS plug to dual 3�5mm (1/8”) stereo jacks
CV OUTPUT:
•
1 3�5mm (1/8”) stereo plug to dual 3�5mm (1/8”) mono plugs
•
1 3�5mm (1/8”) stereo plug to dual 3�5mm (1/8”) mono plugs
2.2.3.3 Cv d
aTa
Output: The QuNexus Gate and CV outs can output signals from USB3/Expander MIDI and the
keyboard/sequencer tracks� The supported sources are Clock, Pitch Bend, Control Changes,
Channel Aftertouch, Note On/Off (gate and pitch), Velocity, Tilt, and Pressure�
The default routings for factory preset A (Basic 2�0) are:
•
Gate - Track 1 - Note Ons and Offs� Note Ons are expressed as 5 volts�
•
CV1 - Track 1 - Note Pitch
•
CV2 - Track 2 - Note ons and Offs� Note Ons are expressed as 5 volts�
•
CV3 - Track 2 - Note Pitch
Summary of Contents for QuNexus RED
