Vertical and Horizontal Slider Edit Pane
The Vertical and Horizontal Slider Edit Panes have
essentially the same editable parameters.
There are 4 banks available per slider. The Horizontal
Sliders each have their own Left/Right Buttons to control
which bank is selected. (See the
chapter for more information).
The banks of the Vertical Sliders can be selected by using
either the Rhombus button, or one of the Up/Down button
pairs. This is programmable in the edit panes for those
buttons. (See the
chapters for more information).
The Slider Edit Pane parameters include a Note, Pressure
CC#, and Location CC# for each bank. To disable a
source, set the number box below 0 to “off”. Enable
velocity sensitivity for MIDI notes with the “
Vel
” check
boxes. If unchecked the velocity of the note (if the note is
enabled) will be fixed at 127.
Sensitivity and Local LED Control parameters are at the
very bottom of the edit pane. For more information on
these please reference the
and
chapters in this section of the manual.
Long Slider Edit Pane
The Long Slider Edit Pane is similar to the Vertical and
Horizontal Slider edit panes.
There are 4 banks available. The banks of the Long
Slider can be selected by using either the Rhombus
button, or one of the Up/Down button pairs. This is
programmable in the edit panes for those buttons. (See
the
or the
chapters for more information).
The Long Slider Edit Pane parameters include a Note,
Pressure CC#, Location CC#, and Width CC# for each
bank. To disable a source, set the number box below 0
to “off”. Enable velocity sensitivity for MIDI notes with
the “
Vel
” check boxes. If unchecked the velocity of the
note (if the note is enabled) will be fixed at 127.
The Sensitivity and Local LED Control parameters are at
the very bottom of the edit pane. For more information
on these please reference the
chapters in this section of the manual.
43