Page 24
DOC0945 (22 August 2022 15:28)
www.keit.co.uk
Back to Table of Contents
5.2.3. Tri-port flow cell - ASM1101
The tri-port flow cell is a ~1.5ml vessel that can be secured to the end of the probe for
continuous analysis of your process
. The flow cell is fitted with three ¼” NPT ports, allowing
liquid to be passed by the ATR with an additional port for a sensor or other equipment to
monitor the liquid. This is primarily used for lab work where flow rate and volume are low.
It is fixed in place two collars that locate into a groove on the probe at the rear of the flow cell,
these are held in place by two screws. The flow cell can be rotated through 360° to
accommodate the user
’s installation.
Figure 24: Tri-port flow cell fitted to IRmadillo probe
Table 6 - Specifications and safety limits (tri-port flow cell)
Parameter
Tri-Port Flow Cell
Pressure
Refer to IRmadillo product label
Analyte Temperature
Refer to IRmadillo product label
Body Material
Corrosion-resistant metal
O-ring Seal
FFKM (Kalrez)
Port Size
1/4" NPT
Cell Internal Volume
~1.5 ml
