Page 17
DOC0935 (26 July 2022 12:02)
www.keit.co.uk
Back to Table of Contents
4. COMPONENTS
This section contains general information about the IRmadillo spectrometer, such as the
constituent components and internal controller specifications.
4.1. IRmadillo spectrometer
Figure 15: ASM0627-10-Z-Cx-Ex-Gx-D3x front and top of the instrument
(A) Product label
The product label specifies the model of instrument with permissible environmental and
analyte operating conditions, along with applicable certification. Particular attention should be
given to the rated pressure and temperature limits.
(B) ATR element
The diamond ATR element is located at the end of the probe.
(C) Probe
The probe is designed to be installed directly into a reaction vessel or pipe and is made of a
corrosion-resistant metal.
(D) Probe (gas) purge outlet
Allows purge gas to escape the probe. There is a single outlet located on the probe for all
purge gas to escape.
