P a g e
7 | 13
Configuring μVision v5
With the board assembled and connected to the ULINK
pro
JTAG unit, perform the tool configuration tasks.
These tasks are all performed from the
Options
dialog. This dialog box is found under the
Project
menu or button.
1.
Enter the
Debug
tab. From the Options tab, modify the “Debug”, “Linker”, and “C/C++” tabs.
2.
From the
Use
selector, choose “ULINK
pro
Cortex Debugger” (highlighted). The software connects to the
ULINK
pro
debugger.
3.
Select the
Settings
button to select specific features. The dialog opens as follows:
4.
Ensure the
Connect & Reset Options
are set as indicated above. That is, SWJ is selected and
Port:
is set to SW.