P a g e
4 | 13
6.
Install the Kinetis K60 Device Family Pack (K60_DFP) by performing the following steps:
a.
Click the Packs tab. Initially, the Software Pack ARM::CMSIS is installed by default.
b.
Select Keil::Kinetis_K60_DFP and click Install. The latest Pack downloads and installs to
C:\Keil_v5\ARM\Pack\Keil\Kinetis_K60_DFP\ by default. This download can take two to four minutes.
The status updates and indicates “Up-to-date”.
7.
Repeat the above process for the Kinetis K60 Software Development Kit (SDK_DFP).
Locate & Install the IoT Operational Software
The following assumes you are working with the Avnet AT&T Cellular IoT Kit software.
1.
Export from developer.mbed.org.
2.
Open your browser and navigate to
https://developer.mbed.org/users/JMF/code/Avnet_ATT_Cellular_IOT/
The page displayed will look like the following:
3.
On this page, select the Export to desktop IDE button. The area shown in the circle appears.
4.
Select FRDM-K64F and μVision 5.
5.
Click the Export button to generate a ZIP file, with the project in it, and automatically download it to your
download folder.
6.
Using Windows Explorer, open the ZIP file and extract it to your desired location (e.g., Documents folder).
Once it is extracted, you are ready to import it into the Keil IDE.